Republic-Ford JB-2

JB-2/KGW Loon

Republic/Ford JB-2 at the National Museum of the United States Air Force.
Type Cruise missile
Place of origin  United States
Service history
In service 1945-1950
Used by United States Army Air Forces
United States Air Force
United States Navy
Production history
Manufacturer Republic Aircraft
Willys-Overland
Ford Motor Company
Produced 1944-1945
Number built 1,391
Specifications
Weight 5,000 pounds (2,300 kg)
Length 27 feet 1 inch (8.26 m)
Diameter 34 inches (860 mm)

Warhead High explosive
Warhead weight 2,000 pounds (910 kg)

Engine Ford PJ31 pulsejet
660 lbf (2.9 kN)
Wingspan 17 feet 8 inches (5.38 m)
Operational
range
150 miles (240 km)
Speed 425 miles per hour (684 km/h)
Guidance
system
Radio command
Accuracy 0.25 miles (0.40 km) at 100 miles (160 km)

The Republic-Ford JB-2 Loon was a United States copy of the German V-1 flying bomb. Developed in 1944, and planned to be used in the United States invasion of Japan (Operation Downfall), the JB-2 was never used in combat. It was the most successful of the United States Army Air Forces Jet Bomb (JB) projects (JB-1 through JB-10) during World War II. Postwar, the JB-2 played a significant role in the development of more advanced surface-to-surface tactical missile systems such as the MGM-1 Matador and later MGM-13 Mace.

Contents

Wartime development

The United States had known of the existence of a new German secret weapon since 22 August 1942 when a Danish Naval Officer discovered an early test version of the V-1 that had crashed on the island of Bornholm; in the Baltic Sea between Germany and Sweden. A photograph and a detailed sketch of the V-1 test unit V83 was sent to Britain. This led to months of intelligence-gathering and intelligence-sifting which traced the weapon to Peenemünde, on Germany's Baltic Coast, the top-secret German missile test and development site.[1]

As more intelligence data was obtained though aerial photography and sources inside Germany, it was decided in 1943 for the United States to develop a jet-powered bomb as well. The United States Army Air Forces gave Northrop Aircraft a contract in July 1944 to develop the JB-1 (Jet Bomb 1) turbojet-powered flying bomb under project MX-543. Northrop designed a flying-wing aircraft with two General Electric B1 turbojets in the center section, and two 900 kg (2000 lb) general purpose bombs in enclosed "bomb containers" in the wing roots. To test the aerodynamics of the design, one JB-1 was completed as a manned unpowered glider, which was first flown in August 1944.[1]

However, in July 1944, three weeks after German V-1 "Buzz Bombs" first struck England on June 12 and 13, American engineers at Wright Field, fired a working copy of the German Argus As 014 pulse-jet engine, "reverse-engineered" from crashed German V-1s that were brought to the United States from England for analysis. The reverse engineering provided the design of America's first mass-produced guided missile, the JB-2.[2]

By 8 September, the first of thirteen complete JB-2s, reverse engineered from the material received at Wright Field in July was assembled at Republic Aviation. The United States JB-2 was different from the German V-1 in only the smallest of dimensions. The wing span was only 2½ inches wider and the length was extended less than 2 feet (0.61 m). The difference gave the JB-2 60.7 square feet of wing area versus 55 for the V-1.[1]

This was the first unmanned guided missile in America's arsenal. The first launch of a JB-2 took place at Eglin Army Air Field in Florida on 12 October 1944. In addition to the Eglin group, a detachment of the Special Weapons Branch, Wright Field, Ohio, arrived at Wendover Field, Utah, in 1944 with the mission of evaluating captured & experimental systems, including the JB-2. Testing was from a launch structure just south of Wendover's technical site.[3] Parts of crashed V-1s and JB-2s are occasionally found by Wendover Airport personnel.[1]

In December 1944, the first JB-1 was ready for launch. The missile was launched by a rocket-propelled sled along a 150 m (500 ft) long track, but seconds after release the JB-1 pitched up into a stall and crashed. This was caused by an incorrectly calculated elevon setting for take-off, but the JB-1 program was subsequently stopped, mainly because the performance and reliability of the GE B1 turbojet engines were far below expectations. In addition, the cost to produce the Ford copy of the Argus pulse-jet engine of the JB-2 was much less than the GE turbojets. Subsequently work proceeded on the JB-2 for final development and production.[1][4]

An initial production order was 1,000 units, with subsequent production of 1,000 per month. That figure as not anticipated to be attainable until April 1945. Republic had its production lines at capacity for producing P-47 Thunderbolts, so it sub-contracted airframe manufacturing to Willys-Overland. Ford Motor Co built the engine, designated IJ-15-1, which was a copy of the V-1's 900-lb. thrust Argus-Schmidt pulse-jet. Guidance and flight controls were manufactured by Jack and Heintz Company of Cleveland, Ohio, and Monsanto took on the task of designing a better launching system, with Northrop supplying the launch sleds. Production delivery began in January 1945.[1]

An envisioned 75,000 JB-2s were planned for production. A USAAF launching squadron was formed in anticipation for using the weapons both against Nazi Germany and Japan. However, the end of the European War in May 1945 meant a reduction of the number of JB-2s to be produced, but not the end of the program. Army commanders in Europe had dismissed it as a weapon against Nazi Germany, as the strategic bombing concept was implemented and by 1945 the number of strategic targets in Germany was becoming limited. However, the JB-2 was envisioned as a weapon to attack Japan. A 180-day massive bombardment of the Japanese Home Islands was being planned prior to the amphibious landing "by the most powerful and sustained pre-invasion bombardment of the war". Included in the assault were the usual naval bombardment and air strikes augmented by rocket-firing aircraft and JB-2s.[1]

A navalized version, designated KGW-1, was planned to be used against Japan from LSTs (Landing Ship, Tank) as well as escort carriers (CVEs). In addition, launches from PB4Y-2 Privateers were foreseen and techniques developed. The official U.S. Air Force Fact Sheet on the JB-2 states just before the end of the war, an aircraft carrier en route to the Pacific took on a load of JB-2s for possible use in the planned invasion of the Japanese home islands, however the name of the carrier has never been identified. In addition, according to one Eglin AFB history, an unidentified USAAF unit in the Philippines was preparing to launch JB-2s against Japan.[1] The war's end led to the cancellation of Operation Downfall and the production of JB-2s were terminated on 15 September. A total of 1,391 units were manufactured.[1]

Postwar testing

The U.S. Army Air Force continued development of the JB-2 as Project MX-544, with two versions: one with preset internal guidance and another with radar control. Several launch platforms were developed, including permanent and portable ramps, and mobile launching from beneath the wings of Boeing B-17G or Boeing B-29 bombers, much as the Heinkel He 111H-22 had actually done late in the war for the Luftwaffe. Testing continued from 1944 to 1947 at Eglin to improve launch and guidance.

The U.S. Navy's version, the KGW-1, later redesignated LTV-N-2, was developed to be carried on the aft deck of submarines in watertight containers. The first submarine to employ them was the SS-348 Cusk which successfully launched its first Loon on February 12, 1947, off Point Mugu, California.

After the United States Air Force became a fully independent arm of the National Military Establishment 18 September 1947, research continued with the development of unmanned aircraft and pilotless bombers, including the already available JB-2.

The USAF Air Materiel Command reactivated the JB-2 as Project EO-727-12 on 23 April 1948, at Holloman AFB, New Mexico, the former Alamogordo Army Air Field. The JB-2 was used for development of missile guidance control and seeker systems, testing of telemetering and optical tracking facilities, and as a target for new surface-to-air and air-to-air missiles (ironically fulfilling the former V1's covername, Flakzielgerät - anti-aircraft target device). The JB-2 project used the North American Aviation NATIV (North American Test Instrument Vehicle) Blockhouse and two launch ramps at Holloman: a 400 ft (120 m), two-rail ramp on a 3 degree earth-filled slope, and a 40 ft (12 m) trailer ramp. The 40' trailer ramp was the first step toward a system which would eventually be adapted for the forthcoming Martin MGM-1 Matador, first operational surface-to-surface cruise missile built by the United States. The program at Holloman was terminated on 10 January 1949 after successful development of a radio guidance and control system that could control and even skid-land a JB-2 under the control of an airborne or ground transmitter.[1]

The Air Proving Ground Command used JB-2s in a series of tests in the late 1940s and 1950s. In the spring of 1949, the 3200th Proof Test Group tested launching JB-2s from the under the wings of Convair B-36 bombers at Eglin AFB.[5] About a year later, JB-2s were tested as aerial targets for experimental infrared gunsights.[6]

In the summer of 1992, military crews uncovered the well-preserved wreckage of a JB-2 at a site on an Air Force-owned section of Santa Rosa Island. Most crash sites on the barrier island were little more than flaky rust, but after the find, officials were planning further searches.[7]

JB-2 survivors

See also

Related development
Aircraft of comparable role, configuration and era

References

United States Air Force portal
Military of the United States portal

 This article incorporates public domain material from websites or documents of the Air Force Historical Research Agency.

  1. ^ a b c d e f g h i j U.S. Air Force Tactical Missiles, (2009), George Mindling, Robert Bolton ISBN 978-0557000296
  2. ^ USAFHRA document 01014091
  3. ^ The launch area is visible on Google Earth.
  4. ^ Garry R. Pape, John M. Campbell: "Northrop Flying Wings", Schiffer Publishing Ltd., 1995
  5. ^ USAFHRA Document 00103281
  6. ^ USAFHRA Document 00425257
  7. ^ Associated Press, "V-1 copy sparks interest," Northwest Florida Daily News, Fort Walton Beach, Florida, 1 October 1992, p. 1B

External links